If you’re reading this, there’s a good chance that you’re holding a smartphone in your hand with the Apple logo flashing on it. First things first: breathe in deeply; we can do this.
An iPhone stuck on the Apple logo cannot complete the boot-up process for a number of reasons; this condition is referred to as a “boot loop.”
It’s possible that a data upgrade or transfer error caused the software to get corrupted. Although nobody is to blame,
Additionally, jailbreaking your phone may lead to software issues that could cause an iPhone boot loop. What you do in your spare time is your business. Of
Of course, hardware problems can also be to fault, but you should know that this in no way indicates that your phone is beyond repair.
So, if your iPhone won’t boot past the Apple logo, what can you actually do? We suggest taking the aforementioned steps.
When your iPhone unexpectedly gets stuck on the Apple logo and won’t even launch the Home Screen, it is quite aggravating. The good news is that your phone probably isn’t broken. You may remove the Apple logo off your iPhone’s screen in a number of ways.
This article will outline all potential reasons and fixes for the stuck Apple logo on your iPhone.
Why Does Your iPhone Keep Stuck on the Apple Logo and Won’t Turn On?
If your iPhone is frozen on the Apple logo and keeps switching off, don’t panic. You probably don’t realise how common this problem is. You can usually fix it yourself without seeing a mobile phone expert most of the time.
Let’s start by discussing the cause of your iPhone’s stuck-on Apple logo. There are several reasons why your iPhone won’t go past this booting phase, including:
The phone’s software is broken. When updating an older iPhone model with the most recent iOS version or while transferring data, this issue could occur.
Data backups from iTunes or iCloud were duplicated or restored, restoring corrupted data.
The jailbreaking of the iPhone could have caused a boot loop and other software issues.
It’s possible that dropping your iPhone caused hardware or internal component damage.
1. Force your iPhone to restart
You could try restarting your iPhone to fix this issue. Different iPhone models, however, need various restart techniques.
For an iPhone 8 or later, iPhone Se (2nd Generation),
Toggle between pressing and releasing the Volume Up and Volume Down buttons. After then, hold down the side button on the phone for a
The Apple logo is seen. If you don’t follow this procedure correctly, your phone may text your SOS contacts.
It’s typical for the screen to flash while rebooting before shutting off. It will restart without going into a boot loop. Most problems are resolved through this technique.
difficulties, however, there could be instances where it fails.
In relation to an iPhone 7 or iPhone 7 Plus
While holding down the Volume Down button, simultaneously press the Side button. Before letting go, wait a short while until the phone reboots and the Apple logo reappears.
For a first-generation iPhone SE, iPhone 6S, or Earlier
The Apple logo will vanish once you press and hold the Home and Sleep/Wake buttons for a short period of time. Release the two buttons once the logo displayed.
2. Update iOS
Try reinstalling iOS if the force restart doesn’t fix the issue. It’s likely that your phone was halted in the middle of an upgrade, which led to iOS becoming corrupt.
Get your iPhone and computer connected. Open Finder first if you are using macOS Catalina or a later version. Open iTunes if you’re using a Windows computer or a Mac running macOS Mojave or an earlier version.
Find your iPhone in iTunes or Finder. Once it’s connected, adhere to the directions above to forcibly restart it once again while maintaining pressure on the buttons in
the procedure until you reach the iPhone’s Recovery Mode screen, which displays a computer icon.
Select Update from the list of update or restoration choices. Without wiping your data, your computer will download and reinstall iOS.
3. Utilize system repair software
Consider using commercial or freemium system repair software like Fixppo if the previous two techniques didn’t work. event in which the iPhone 11 was infamous
These methods can be used to resolve additional iPhone issues in addition to stuck on the Apple logo.
Additional iOS system recovery tools include Dr. Fone, TunesKit, Tenorshare Reiboot, iMyFone, and FonePaw.
4. Perform a factory reset
If your iPhone won’t turn on, think about performing a factory restore. If you select this option, all of the data on your phone will be erased. Data recovery will be much easier if you have an iCloud or PC backup of the files on your iPhone.
If you don’t have a backup after you do this step, all of your data will be lost.
To complete a factory restore, boot your device into recovery mode as described in the sections above. On your computer, however, you should now select the Restore option.
rather than performing an iPhone update.
We advise you to only do this after exhausting all other options.
5. Execute a DFU Restore.
The Device Firmware Update mode (DFU mode), which replaces any out-of-date software and firmware with brand-new code, can be used to recover your iPhone. As a result, it might help your phone recover from serious issues.
Utilize an Apple-approved USB cord to connect your iPhone to a computer. then adhere to the directions below based on the model of your iPhone.
When each iPhone model reaches the final phase, make sure the screen is still dark. If it does, it has entered DFU mode and you must follow the instructions on your computer.
But if you see the iPhone screen or the iTunes icon, it’s in recovery mode. After connecting your iPhone, restart your computer and continue with the instructions below. This time, be sure to get the timing right.
For an iPhone 8, iPhone SE, or iPhone 8 Plus of a later generation
Do the following:
Press and quickly let go of the Volume Up and Volume Down buttons, respectively.
Hold the Side button down firmly. When the screen goes black, hold down the Volume Down button while pressing it.
About five seconds should be spent pressing these buttons. Release the Side button after holding the Volume Down button.
Pay attention to the guidance that your computer provides.
Concerning an iPhone 7 or iPhone 7 Plus
Do the following:
Press and hold the Side button while also holding down the Volume Down button.
Hold both of these buttons for an additional eight seconds after releasing the Side button.
Your computer will detect your smartphone if you continue to hold down the Volume Down button.
For an iPhone SE, iPhone 6S, or an earlier model
Do the following:
Press and hold the Sleep/Wake button while also holding down the Home button.
After around eight seconds, press and hold the Sleep/Wake button while releasing the Home button.
Your computer will detect your iPhone if you continue to hold down the Home button.
6. Have an Apple Store fix it.
It’s time to have your iPhone professionally fixed if you’ve tried all of the alternatives listed above. Apple should pay for the repair for free if your iPhone is still covered by warranty, providing that it hasn’t sustained any other damage, such liquid damage.
Repairing your phone could disclose undiscovered hardware problems. For instance, if your iPhone continued getting stuck on the Apple logo, it may be that the logic board is broken and needs to be replaced.
Visit Apple’s Get Support page to schedule a repair.
iPhone Stuck on Apple Logo Issue Fixed
The most crucial step to take when your iPhone is stuck on the Apple logo is to identify any potential causes. After that, you can attempt the answers we provided above to help solve the issue. Please leave it to the professionals to fix your iPhone if everything else fails.